I work for a Gm dealership and was a little skeptical at first about this GM Tech 2. After receiving very quick from seller
I tested it out on every platform, programming, system scans, live plot,
remote functions, everything and it has matched everything my shops
factory 2000 dollar Tech 2 has done. Best money I’ve spent on a tool in a very long time!
This Tech II Scan Tool clone performs exactly the same as dealership scan tool. Everything listed in the sale was there.
This is obviously a knock off of the original tool but you would never
know if someone did not tell you. It comes without any labels or
stickers on it,
but they were included in a bag ready for you to put them on the tool
and accessories. I have used this tool on a 2004 Pontiac grand prix and a
2006 grand
prix to perform diagnostics and set up a new body control module. I went
through every screen, tried all the function tests and learn
procedures.
No issues with this tool at all. Cables, plugs and accessories are all
of quality construction. I could not be happier with this purchase.
I have been very happy with this scanner, the cables can be a bit
finicky at times, and I had to remove and reinstall the memory card
several times to
get a good connection on it, but have had no issues at all other than
that. I have used it on 2004 Pontiac Bonneville, Saab and Chevrolet
Suburban all worked well.
I was pretty skeptical when saw these clone at cheap 250$-380$. Most
dealers charge a $100+ diagnostic fee just to hook theirs up to your
car, what a joke.
I got one English language software version with 32 MB Card, CANDI,
TIS2000 and other diagnostic cables. And I hooked it up to test engine,
ABS, transmission etc,
stored DTCs, Freeze Frame, live data, all the test results were
displayed on the large, easy-to-read backlit screen. Keeping the GM Tech
2 for half a year,
no blue/blank screen or communication issue. Now the device is in good condition.
Got my GM Tech2 from www.obd2tool.com
today, it looks and functions well for a clone. The tech2 and CANDI
module worked perfect to diagnose my bad HVAC air door actuator.
I have an older HP laptop running win7 and it has a serial port so has
no problem to install software. Time will tell how this works out.
The tech2 clone has done everything I have used it for. I have check
and cleared codes including freeze frame data. I used it to test
injectors on my friends NOVA 5.3 swap.
It allowed me to pulse each injector so we knew they were not clogged.
Still no problems with this GM Tech2 clone. I was able to use SPS
programming to update the theft module OS in my Chevrolet TrailBlazer
SS.
And I found this tool can be used on OBD1 cars. I tried it to diagnose my friend’s 1994 Pontiac Trans Am, it worked!
http://obd2lily.mihanblog.com/post/135
