How to install SD Connect C4 WiFi on Windows 10

Have good success with MB SD Connect C4 windows 10.

I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.

After days of investigation and testing, the most important thing to understand is this. The drivers for your wireless card MUST support AdHoc functionality. The Benz diagnostic tools are the secret sauce that makes this possible. This can be verified at the DOS command prompt. The command is: netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.

Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.

The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.

Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.

AdHoc can now be verified at the DOS command prompt. The command is:
netsh wlan show drivers
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly

With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity. The procedures for the additional steps required are well documented in OBD2TOOL or GOOGLE.

This is what worked for me. Depending on your computer skills, your results may vary.

If you find my posting to be of help to you, Thanks and Rep would be most appreciated.

Happy motoring

http://cheapobd2scanner.com/2017/07/27/how-to-install-sd-connect-c4-wifi-on-windows-10/!

How to quick fix MB Star C4 Xentry “No more updates” error?

When run 05.2017 MB Star C4 Xentry or other previous versions, the error show “No more updates can be installed on the diagnostic system.”.

What’s the solution? Check below quick fix method!

Mercedes Xentry error when Mercedes MED177 M278 engine for E550 4matic 2012

Xentry error message

The following functions are not available:

Initial setup

SCN coding

Control unit update

Same error also show when Benz diagnostic tool Xentry program Mercedes 7G tronic transmission

Quick fix method for MB Xentry error “No more updates”

(Tested and given by engineers)

Just download this new Kontexte file and replace the old one

https://mega.nz/#!wh5AxKqJ!VanGy5sXsiaiFG5AXZmJlTLrgXsByBuPDcsdMzIVwR8

The Kontexte file location should be:

C:\Program Files(x86)\ Mercedes-Benz \ Xentry \ Kontexte

And things done!

Now you can run Xenrty software and start again.

Some useful information:

2017.5 MB SD C4 software SSD WIN7 at obd2tool.com

2017.5 MB SD C4 software HDD WIN7

100% tested working stable with SD C4 Connect!

http://chinaobdtool.net/2017/06/05/how-to-quick-fix-mb-star-c4-xentry-no-more-updates-error/