CAT ET 3 Truck Diagnostic Tool Heavy Duty Wi-Fi Adapter CAT et3 Wifi Version

Description:
Caterpillar ET3 Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group,and replaces the CAT Comm Adapter II. This is the only recommended communication device for CAT,and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks. This function is needed for some CAT ET (Electronic Technician) functions.

Function:
1.Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
2.View ECM’s current configuration and change user settings
3.Perform diagnostic tests and calibrations, and calibrate
4.Electro-mechanical and electro-hydraulic components
5.Context sensitive help leads operator through every task Cat ET can perform
6.Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.
Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator Cat “ET Trainer” is now included in ET Program. It allows Users to train and practice using Heavy Duty Truck Scan Tool Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

Communication:
1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks
2. Flash program allows adapter firmware upgrades as additional features become available
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

Specification:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Showswhen problem occurred and how often it happened.
7.Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubeshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the “How To” around the software.

www.obd2tool.com

Caterpillar ET 2011A Windows XP78 Install Tutorial

I wrote a guide to install it and I uploaded the patch and the drivers here, including how to solve the connection trouble on the Windows XP SP3 computer (Error #434: The requested baud is invalid) This is because you need to patch ET 2011A.

I know that anything isn’t going to work like the original, but at this time is the tool I have in my hands.

For those like me, I upload the files and I put the links on the attach bellow:
Cat ET 2011A PATCH

https://mega.co.nz/#!jQpgQbJY!hlywN6fLOA_1iojqdj0kToQRWrFsnHPDWiBHCJNEag0

CommunicationAdapterServer

https://mega.co.nz/#!vFxAHKrB!FWoVp6lQ9PeSfnDVuneITmn9gZmLt5iYi6k0gnbIFuo

CP210X USB to UART Driver

https://mega.co.nz/#!iJxhwAbZ!Ph3OtDQAr1l-uKckoBe1Rg51_l3rKpUKcaI3hNpv4bY

FTDI USB to UART Driver

https://mega.co.nz/#!TY5ijLqD!o_ZVBqU5jVeQjPrF3_VjyApMbYf0TLLPf_mjvbC3IzM

Here a leave the instructions:

*   Clean install
*   Install ET 2011A
*   Install FTDI USB to UART Driver
*   Install CP210X USB to UART Driver
*   Open the ET 2011A. Click “Utilities” > “License Cat ET” > Generate code and paste it.
*   If your OS is Windows XP goto step 7 or Windows 7/8 goto step 8.
*   Copy “CommunicationAdapterServer.exe” to “\Program Files\Common Files\Offboard Information Products”
*   ONLY IF WINDOWS 7/8. Open Cat ET 2011A Patch. Select unit and os guest (32 or 64 bits). And click Patch, it would show you Patched it message OK.
*   Reboot computer.
*   Connect USB and bluetooth and wait to install and disconnect them.
*   Go to properties on “My computer”, open hardware management and check USB and bluetooth com port number.
*   Open the ET 2011A and goto Utilities->Preferences->Communications

Select “Heavy Duty Truck diagnostic Scanner Caterpillar Comm Adapter II (Dual Data Link/Serial lP)

Select the same COM port as you noticed in step 11 (USB or bluetooth the one you already connected. 1 only)

It works now. I tested it on a Cat 950G and it show me the 3 ECM, however I’m having trouble to connect with a Cat 416E, I get the message check cable connection, no cable detected.

But it works perfect on a Cat 950G.

Regards.

www.obd2tool.com