This blog will show how to program 2013 Range Rover Evoque remote key by SKP-900. This is a tested success case: for 2013 Range Rover Evoque with only one working remote key, you can program new remote key by using SKP900 key programmer about 3 minutes!
Below are operating steps:
Connect Key Program Tool SKP-900 with car via OBD port then power up SKP-900.
Choose function “IMMOBILIZER”
Choose car brand “LAND ROVER”
Select year “2012-2013” then “RANGE ROVER (2012-)”
Select model “EVOQUE (2012-)”
Wait it is loading…
Choose “IMMOBILIZER SYSTEM”
Press car start button to turn on ignition.
Choose “ADD KEYLESS TYPE 1” it needs at least one registered keyless.
Put the registered keyless close to car gear shift then turn ignition off.
SKP-900 key programmer will turn car ignition on, press YES button.
Now car key number is 3.
In 5 seconds quickly press the new key Unlock button.
Now car key number detected is 4.
Again quickly press the new key Unlock button in 5 seconds.
ADAPT SUCCESS!
SuperOBD SKP900 on obd2tool.com successfully programs a new key for 2013 Range Rover Evoque! New key is working!
http://www.itninja.com/blog/view/skp900-review-honda-nissan-toyota-mazda-chevy-ok
Land Rover Discovery 4
http://obd2lily.mihanblog.com/post/139
What can you do when Toyota all keys lost? Here I will offer the steps to help you deal with this problem with SuperOBD skp900 key programmer by yourself. Hope it help DIYs.
First of all, connect the equipment to TOYOTA
Choose [IMMOBILIZER]-> [TOYOTA]
Select [IMMOBILIZER1], and it will load by itself, just wait for a while
Choose [IMMOBILIZER SYSTEM]
Then the interface pops out, insert car key and turn on the ignition and
press [YES] to continue
When it enters [FUNCTION SELECTION], choose [ALL KEY LOST]
[MATCH NEXT KEY?], press [NO] to go back
Press [NO] to go back
Switch off the ignition, and the key can’t turn on the ignition again.
Insert a master key turn ignition on and insert new key and you can turn ignition on now!
http://forobd2tool.com/blog/2017/08/08/how-to-make-new-key-for-toyota-with-skp900-key-programmer/
What can you do when Toyota all keys lost? Here I will offer the steps to help you deal with this problem with SuperOBD skp900 key programmer by yourself. Hope it help DIYs.
First of all, connect the equipment to TOYOTA
Choose [IMMOBILIZER]-> [TOYOTA]
Select [IMMOBILIZER1], and it will load by itself, just wait for a while
Choose [IMMOBILIZER SYSTEM]
Then the interface pops out, insert car key and turn on the ignition and
press [YES] to continue
When it enters [FUNCTION SELECTION], choose [ALL KEY LOST]
[MATCH NEXT KEY?], press [NO] to go back
Press [NO] to go back
Switch off the ignition, and the key can’t turn on the ignition again.
Insert a master key turn ignition on and insert new key and you can turn ignition on now!
http://forobd2tool.com/blog/2017/08/08/how-to-make-new-key-for-toyota-with-skp900-key-programmer/
Some discussions are raised among CK 100 Key Programmer (V45.06 and V99.99) and SuperOBD SKP-900 Key Programmer. What’s the difference among them and how to choose a better one? Following displays the differences:
Function:
SKP900 key programmer is able to calculate pin code for many vehicle models for programming while CK100 can not. CK100 V45.06 and CK100 V99.99 project the same function. Both SKP900 and CK100 can program Toyota G chip.
Quality:
SKP900 is the product of SuperOBD manufacture which ranked highest level among the three. According to customers’ feedback, CK100 V45.06 has a better quality than CK100 V99.99.
Vehicle support:
SKP900 support almost all vehicles in the world and SKP900 manufacturer has got it back and is developing its car list. Auto key programmer CK100 works great on most of vehicle makes and covers some vehicles up to 2014, but it does not cover all of their models, especially the newer ones made in 2014.
Update:
SKP900 support lifelong free update online while CK100 key programmer can not.
http://forobd2tool.com/blog/2017/06/02/skp900-vs-ck100-v45-06-vs-ck100-v99-99/