Device: VAS 5054A clone interface
Software: ODIS-S version 4.3.3
Laptop: Panasonic cf53
Connection: Bluetooth
Error message:
After paring 5954A unit with my Panasonic cf53 and setting up the
Bluetooth and EDIC ok then open Odis 4.3.3 while it’s connecting I get
error message:
ODS2522E
Infrastructure:
The vehicle interface hardware used here is not supported.
Thinking it could be a laptop issue as I can pair the 5054a with a later cf54 and it works fine also try to connect it to 2 other cf53 and get the same error
Suggestion & Solution tested by OBD2TOOL professionals:
Pls try odis 4.3.3 on 64 bit Windows
Then solved!
Note that you’d better have tested odis 4.3.3 software esp. cheap cracked version
It’s not a good idea to get free odis from forums coz many posters just
tested on their own cars and have no enough knowledge of software
compatibility that they cannot offer good tech support when someone has
issues. Anyway, good luck!
This is odis 4.3.3 cracked but tested on hundreds of cars…
Solution from folks:
Follow this steps :
1.- Install ODIS-S as usual but NO restart !
2.- Rename the folder Softing from Program Files (x86) (or Program Files) to Softing.ori
3.- Copy the downloaded Softing folder to Program Files (x86) (or Program Files).
4.- Restart
5.- Install Postsetup
6.- Install ODIS-E 8.1.3 as usual
7.- Thats All !
UPDATE :
1.- Replace Softing directory with the updated directory and you get this…
DOWNLOAD Softing OK UPD:
https://mega.nz/#!FcVgxSYT!6mEcIN2nQqMcwF4TZA31JVJx3WEGI4pjuAb1TyPmO7Q